Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with










See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Fresno?
New window installation in Fresno typically costs between $550 and $1,350 per window for full-frame replacement, with mid-range vinyl windows on a standard single-story home running $650 to $900 per opening, including labor and basic trim work. A whole-home project with 10 to 15 windows usually lands between $6,500 and $18,000 depending on window grade, frame material, and how much structural work the existing openings need. These figures reflect what our crews see across Fresno neighborhoods like Woodward Park, Tower District, Sunnyside, and Fig Garden in 2026, and they include the cost of hauling away old sashes and frames.
At Lightwell Windows Fresno, our style is simple: every estimate is a written price before any work starts. You will not get a “final number” at the end of the day that looks different from the one you approved at the beginning. Keith Yamada, who leads our Fresno team, has been setting up jobs this way since Lightwell joined the Cedarwell network in 2010. It keeps the conversation honest, the same way we would want it handled at our own homes.
If you are just starting to plan new window installation in Fresno, the numbers below will give you a realistic budget before you pick up the phone. Then call (559) 272-9650 and we will put a firm number in writing, free.
Key Takeaways: Fresno Window Installation Costs in 2026
- Average single window: $650 to $900 installed (vinyl, mid-grade, standard size).
- Whole-home (10 – 15 windows): $6,500 to $18,000.
- Labor alone: $150 to $350 per opening, depending on access, floor height, and whether interior trim is reused.
- Full-frame replacement runs 20 – 35% higher than retrofit (insert) installation because it means removing the old frame and re-flashing the opening, not just sliding a new sash into place.
- Typical timeline: 1 day for a handful of windows; 3 to 5 days for a whole-home job with trim work.
- Written price before work starts: Always. No exceptions, part of the Cedarwell Care Promise.
New Window Installation Cost Breakdown (2026)
Here is what a single window installation in Fresno actually breaks into, line by line. These are the numbers we give homeowners on written estimates, and they match what other local contractors are charging for comparable work in 2026.
| Line Item | Cost Range (Per Window) | Notes |
|---|---|---|
| Window unit (mid-grade vinyl, double-pane, Low-E) | $250 – $450 | Brand and size drive this. The same opening in a PGT or CWS window runs higher than a base stock option. |
| Installation labor | $150 – $350 | Single-story, easy access is lower. Second floor, stucco exterior work, or rotten framing adds time. |
| Old window removal and haul-away | $40 – $100 | Most crews fold this into labor. We list it separately so you see exactly what you are paying for. |
| Flashing, sealant, and insulation | $40 – $90 | Pet-safe sealants where there is a choice, and we do not skip the flashing. Fresno’s summer heat makes a bad flashing job obvious within a year. |
| Interior trim and touch-up | $50 – $200 | Reusing existing trim keeps this low. If the old trim breaks on removal, which happens often on 1970s-era Fresno homes, new trim adds to the total. |
| Typical total per window | $550 – $1,350 | Most homes land in the $650 to $900 middle. |
Whole-home numbers: A 10-window replacement in a 1,600-square-foot ranch in Sunnyside or McLane usually runs $6,500 to $9,000 for mid-grade vinyl. The same 10 openings with premium fiberglass or a hurricane-rated line from CGI or PGT can push $12,000 to $18,000. Homes in Fig Garden with older wood windows often have deteriorated sills and need full-frame work, which moves the per-opening cost toward the higher end of the table.
What “New Window Installation” Includes in Our Written Price
When Keith Yamada writes a price at Lightwell Windows Fresno, it covers the whole job, not just the glass. The number includes removal of the old window, the new unit, labor, flashing, insulation, interior and exterior trim where needed, haul-away, and a walkthrough before the crew packs the truck. A photo of the cleaned-up work area comes with the job, part of the Cedarwell Care Promise. The C.A.R.E. values are not a sales line; they are the checklist the crew runs through before leaving: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
What Affects New Window Installation Pricing in Fresno
No two Fresno homes price out the same. Here are the six things that move the number the most, based on the job sites our crews walk every week.
- Window frame material. Vinyl is the workhorse in Fresno and the most common choice: $250 to $450 per unit. Fiberglass and aluminum-clad wood run higher, $600 to $1,100 per unit, and make sense on larger custom openings or when you want a specific architectural look in neighborhoods like Old Fig Garden.
- Stucco and exterior finish work. Most Fresno homes built after 1960 have stucco exteriors. A retrofit insert that keeps the existing frame is simpler and cheaper. A full-frame replacement means cutting back stucco, re-flashing, and patching, which adds $100 to $200 per window in labor.
- House age and framing condition. Homes from the 1940s and 1950s, common near Tower District, often have wood rot around window openings, especially on west-facing walls that catch the full afternoon sun. Rot repair runs $80 to $300 per window depending on what we find once the old frame comes out.
- Glass package. Standard double-pane Low-E glass handles most Fresno summers. Stepping up to a triple-pane package or an impact-rated unit from PGT or CGI adds $150 to $400 per window. On homes near the foothills or on busy streets like Blackstone or Shaw, the quieter glass package is worth the cost.
- Window size and shape. A standard double-hung 36 x 48 is the baseline. Picture windows, bay or bow assemblies, and custom arch-tops cost more, not just for the unit but for the added installation time and extra flashing details.
- Permit and code compliance. Fresno requires egress sizing for bedrooms, meaning a window in a sleeping room must meet minimum opening dimensions. If the current windows are undersized, the new units may need to be larger, which can mean reframing the opening. That is a code matter we handle on the front end so the job passes inspection without surprises.
Which Window Brands Do We Install and What They Cost
Lightwell Windows Fresno carries eight manufacturer brands so the recommendation fits the house, not the installer’s preferred vendor. Here is how the brands we install map to Fresno budgets.
- PGT and CGI (impact and hurricane lines): $850 to $1,500 per window installed. These are overbuilt units and the choice for homeowners who want maximum protection against valley heat and the occasional wild storm front. PGT’s WinGuard line is a frequent pick for west-facing walls.
- CWS and ES Windows (premium and custom aluminum): $1,000 to $1,800 per opening. Big custom picture windows, sliding glass wall replacements, and modern homes with large glazing areas use these.
- ECO Window Systems and Mr-Glass (mid-range vinyl and aluminum): $550 to $900 per window installed. This is the sweet spot for most three- and four-bedroom homes in Fresno, whether in Clovis-adjacent neighborhoods or older Fresno High area homes.
- Therma-Tru and ViewLux (doors and specialty glazing): Door replacements paired with window work run $1,200 to $4,000 per door. ViewLux units show up in patio, garden, and shower-enclosure type applications where the window is more about light than ventilation.
A light well is what brings daylight deep into a building, and that is what a well-installed window should do for your home. The brand decision is secondary to the install quality, but getting both right means the window does its job for decades instead of fighting the house.
Retrofit vs. Full-Frame: Which One Does Fresno Need?
This decision moves the price more than any other single choice on the estimate, so it is worth understanding before you call.
Retrofit (Insert) Installation
A retrofit install keeps your existing window frame in place and slides a new window unit inside it. On a home with solid frames and no rot, this is the lower-cost option and runs $550 to $850 per window fully installed. The trade-off is a slightly smaller glass area, since the new window fits inside the old frame. For homeowners who want to keep costs down and the existing frames are sound, this is the default choice our crews recommend.
Full-Frame Replacement
A full-frame replacement removes everything down to the rough opening, installs a new window with new flashing, and rebuilds the interior and exterior trim. Expect $650 to $1,350 per window for most Fresno homes. The advantage is a completely sealed, square opening and the chance to catch rot or insulation problems while the wall is open. Older homes in Tower District and the Fresno High area, where window frames have seen 70 or 80 summers, often need this route whether the homeowner planned for it or not.
How Much Does New Window Installation Cost by Fresno Area?
Fresno’s neighborhoods price a little differently based on home age, construction style, and access. Here is what our written estimates have looked like in 2026.
- Woodward Park and Northeast Fresno: $700 to $1,100 per window. Homes here trend newer and larger, with more windows per house and more second-floor work, which pushes labor toward the higher end.
- Tower District and Central Fresno: $650 to $950 per window. Older homes with wood frames and stucco siding typically need full-frame work and some rot repair, but window counts are lower.
- Sunnyside, McLane, and Southeast Fresno: $550 to $850 per window. Ranch-style single-story homes are the norm, which keeps access simple and labor lower.
- Fig Garden and Old Fig: $800 to $1,400 per window. Premium homes with larger custom openings, wood trim details, and higher-end brand selections drive this range.
- Clovis-adjacent and Harlan Ranch area: $600 to $950 per window. Mostly newer builds with standard openings, though patio door and sliding glass work often gets bundled in.
2026 Fresno Window Rebates and Utility Considerations
The cost you pay up front is not the whole story. Fresno’s summer cooling season runs long, and single-pane windows on an older home can be the biggest air leak in the building envelope. Replacing them with Low-E double-pane units typically cuts the solar heat gain enough that our customers in older Tower District and Sunnyside homes notice the air conditioner running less by the first August. The actual dollar savings depends on your home’s orientation, insulation, and shading, but the window is always part of the equation.
PG&E and state-level home efficiency programs occasionally offer rebates for qualifying window replacements, but the programs change annually and the eligibility windows are narrow. We suggest checking current PG&E rebate listings or talking to your tax preparer about home improvement credits before committing to a brand. We will never structure a price around a rebate that may not come through.
How to Save on New Window Installation in Fresno
Saving money on windows does not mean cutting corners. It means being smart about scope and timing.
- Replace in phases. Do the worst side of the house first, usually the west and south exposures in Fresno where the afternoon sun does the most damage. You get the energy benefit sooner without paying for 15 windows at once.
- Reuse interior trim where it is sound. If your existing trim is in good shape, saving it is both cheaper and better-looking than cheap new trim.
- Pick the right glass for the wall. A north-facing window in Fresno does not need the same sun-control glass as a west-facing one. Matching the glass package to the wall orientation avoids paying for performance you will not feel.
- Bundle rooms that share a wall. Replacing multiple windows on the same side of the house in one trip is faster than three separate visits, and the labor efficiency shows up on the written estimate.
- Get a written price before committing. A free estimate gives you a real number to compare, and it costs nothing. Call (559) 272-9650 and Keith Yamada or one of our team members will walk the house and hand you a figure you can take to any other contractor.
What to Expect on Installation Day
Homeowners with kids and pets have a specific set of worries on install day, and we have been solving them since 2010. The crew arrives in uniforms, background-checked, and walks the job with you before any tool comes off the truck. Shoe covers go on at the door. Drop cloths cover the floors from the entry to the window. Furniture within three feet of the opening gets moved either by us, after we ask, or by you if you prefer.
For homes with napping kids, we schedule the noisy work like saw cuts and frame removal around the quiet hours we agree on in advance. Pet-safe sealants and caulks are used wherever an alternative exists, and the old window glass is wrapped and carried out, not tossed into a bin outside the nursery window. Before we leave, there is a photo of the cleaned-up work area, and you walk the finished installation with the lead tech.
FAQs – New Window Installation Cost
How much does it cost to install one window in Fresno?
A single window installation in Fresno costs $550 to $1,350 fully installed, with most standard vinyl double-hung replacements landing between $650 and $900. The exact figure depends on whether the job is a retrofit or full-frame replacement and whether the existing frame has any rot. Call (559) 272-9650 for a written price on your specific opening, free.
Is it cheaper to repair a window or replace it?
Glass replacement in an existing frame runs $150 to $350, which is generally cheaper than a full window replacement at $550 to $1,350. The catch is that a failed thermal seal, foggy glass, or a broken sash on a 20-year-old window often means the frame is nearing its own end, and a full replacement may be the better long-term spend. A site walk will tell you which one applies.
How much does whole-house window replacement cost in Fresno?
A whole-house window replacement with 10 to 15 windows in Fresno typically costs $6,500 to $18,000 in 2026. Mid-grade vinyl on a single-story ranch runs $6,500 to $9,000, while premium fiberglass or impact-rated brands like PGT or CGI on the same number of openings can reach $12,000 to $18,000. The spread depends on brand, glass package, and frame condition.
Can new windows be installed same-day in Fresno?
Yes, most single-window and two-to-three window jobs are installed same-day once the window units are in hand. Standard in-stock sizes can usually be scheduled within the week. Custom sizing from brands like ES Windows or CWS adds two to four weeks for manufacturing. Call (559) 272-9650 and we will check current availability for your exact size.
Do I need a permit to install new windows in Fresno?
Fresno requires permits when the window opening size changes, when bedroom egress windows are being replaced, or on full-frame work in some circumstances. Retrofit inserts that keep the same opening typically do not require a permit. Part of our written price includes pulling any required permit and scheduling the inspection on your behalf. The final quote reflects permit fees where they apply, so the number you approve is the number you pay.
Get a Free Written Estimate in Fresno
If you are weighing window installation costs and want a real number instead of a ballpark, call Lightwell Windows Fresno at (559) 272-9650. Keith Yamada and the team will walk the house, measure the openings, check the frame condition, and hand you a written price before any work starts. That is how every job has run since 2010, and it is how the next one will run at your home. Serving Fresno from our home base to every neighborhood in between, with the 365-Day Done Right Promise on every install.
Pricing reflects the Fresno market as of 2026. Lightwell Windows Fresno offers free estimates – call (559) 272-9650.
Written by Keith Yamada, Owner at Lightwell Windows Fresno, serving Fresno since 2010.
Six Reasons Homeowners Choose Lightwell Windows Fresno
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Lightwell Windows Fresno Services
What Neighbors Say About Lightwell Windows Fresno
What Our Customers Say
"Replaced six windows. The crew laid runners through the house and vacuumed each room as they finished. With a crawling baby, that no mess thing meant a lot. Windows are gorgeous."
- Rosalind Kemp"They replaced a big foggy picture window. Careful with the furniture, laid down protection, and left no mess at all. Calm and respectful crew, and the view is clear again."
- Teresa Okafor"Front door replacement. The installers were careful, clean, and gentle, took their shoes off inside and swept the entry when done. The door seals perfectly and looks beautiful."
- Hollis Wyatt